CATHAY suspended multi-layer shaking table Three-dimensional space utilization High efficiency and space saving

CATHAY suspended multi-layer shaking table: three-dimensional sorting, a tool for efficient use of space

1. Multi-layer suspension design, double space utilization

Using a unique suspended multi-layer structure, 2-5 layers of shaking table surfaces are combined into one through high-strength suspension brackets. The overall footprint is only 1.2-1.5 times that of a single-layer shaking table, but it can achieve 2-5 times the processing capacity. The suspension system adopts an elastic shock-absorbing device, and the vibrations of each layer of shaking table surface do not interfere with each other during operation, ensuring that each layer can maintain a stable sorting state. This three-dimensional design is particularly suitable for small and medium-sized ore dressing plants with tight space, greatly increasing production capacity within a limited space and reducing plant construction costs.

2. Multi-layer collaborative sorting, high efficiency and recovery rate

Each layer of the shaking table surface is independently equipped with a transmission system, and the stroke (8-25mm), stroke (200-450 times/minute) and lateral slope (0-5°) can be adjusted individually according to the characteristics of the ore type, realizing "multi-layer synchronous operation and parameter differentiation optimization". For example, when processing gold sand, the upper layer can be set with roughing parameters for rapid enrichment, and the lower layer can be set with fine parameters to improve purity. The overall recovery rate is 10%-15% higher than that of a single-layer shaking table, and the concentrate grade can reach more than 90%. For fine-grained minerals of 0.074-2mm, multi-layer collaborative sorting can reduce intermediate transportation losses and improve sorting efficiency by more than 20%.

3. Adapt to multiple types of minerals and a wide range of sorting

In the field of metal ore sorting, gold, silver, tin, tungsten, copper, etc. can be efficiently processed; in the processing of non-metallic ores, the sorting effect of barite, fluorite, feldspar, etc. is significant, and it can also be used for the recovery of low-grade useful minerals in tailings. Whether it is processing placer, vein ore or oxide ore, through the differentiated setting of multi-layer parameters, it can accurately match the sorting needs of different minerals and adapt to a variety of mineral processing scenarios.

4. Stable and durable structure, stable and reliable operation

The surface of the shaking table is made of wear-resistant rubber or fiberglass, and special anti-slip strips are laid on the surface. It has excellent wear and corrosion resistance and a service life of 5-7 years. The suspension bracket is made of high-strength steel, which is strengthened by heat treatment and has strong load-bearing capacity, which can ensure the long-term stable operation of the multi-layer structure. The transmission system is driven by an eccentric shaft and matched with high-precision bearings. It runs smoothly without jamming and has a low failure rate, which can meet the high-intensity requirements of continuous production.

5. Convenient operation and flexible multi-layer collaborative control

Equipped with a centralized control system, the operating parameters of each layer of shaking table can be adjusted separately on the same operation panel, and parameter memory and call functions are supported. There is no need to re-debug when changing the ore type. The equipment is equipped with a high-definition monitoring window, which can observe the distribution status of each layer of ore belt in real time. The operator can optimize the overall sorting effect by fine-tuning the parameters of a single layer. It can quickly get started without professional skills and reduce labor costs.

6. Energy saving and low consumption, economical operation cost

Adopting variable frequency speed regulation motor drive, the energy consumption is reduced by 15%-20% compared with the traditional multi-layer shaking table, and the energy consumption per unit processing volume is lower when the multi-layer collaborative operation is carried out. The equipment has a compact structure and does not require complex auxiliary equipment. Daily maintenance only requires regular inspection of the stability of the suspension system and the lubrication of the transmission components. The maintenance cost is low and it is suitable for small and medium-sized enterprises with limited budgets.

7. Various specifications can be customized on demand

It provides 2-layer, 3-layer, 4-layer, 5-layer and other specifications. The single unit processing capacity covers 1-30 tons/hour, which can be flexibly selected according to the scale of the mine and site conditions. It supports customization of the shaking table surface size, inclination adjustment range, etc. according to customer needs to ensure that the equipment is perfectly adapted to the existing production line and meet the personalized production needs in different scenarios.

8. CATHAY brand guarantee, worry-free service throughout the process

Each suspended multi-layer shaking table undergoes strict load testing and vibration testing before leaving the factory to ensure that the performance meets the standards. The professional after-sales team provides a full range of services such as on-site installation and commissioning, operation training, and regular inspections. The 7×24-hour technical hotline responds to customer inquiries at any time, promptly solves problems in equipment operation, and escorts the continuous and stable operation of mineral processing production.

Table parameters